KitchenAid · Dallas County · premium tier
KitchenAid dishwasher & range repair in Irving, TX
KitchenAid ranges, dishwashers, refrigeration in Irving — diagnosed on site by a licensed, insured technician, quoted before any work starts, and in most cases repaired the same visit.
KitchenAid repair in Irving
Why Irving KitchenAid owners call the Cowboys
Most KitchenAid calls from Irving start the same way: burner clicks but won't light, or oven not holding temperature. Both point to a specific fault on a specific model, and both are repairable in your kitchen. Irving is in Dallas County, on the eastern side of the 35-mile radius we run from our Fort Worth shop, and we cover it daily.
Tell the dispatcher your Irving address plus the KitchenAid model and serial number and the technician arrives with the likely parts on the truck. The phone line is answered 24/7, and emergency calls in the Fort Worth area typically see a technician within 1–2 hours.
- Licensed & insured
- Open 24/7
- Same-day service
- 1–2 h emergency response
- EPA-certified refrigerant work

What we repair
KitchenAid dishwasher & range repairs in Irving
In practice, KitchenAid work in Irving covers pro ranges & cooktops, dishwashers & dishdrawers, built-in refrigeration — and the four repair groups below account for most of it.
- Dishwasher pumps, inlet valves and control boards
- Commercial-style range igniters and oven temperature sensors
- Refrigerator cooling, ice maker and water-line repairs
- Door seals and hinge adjustments
Symptoms we hear from Irving
Sound familiar?
- Burner clicks but won't light
- Oven not holding temperature
- Induction zone dead
- Gas smell at the knobs
Pro ranges & cooktops · Dishwashers & DishDrawers · Built-in refrigeration
How service works in Irving
From your call to a working KitchenAid
We reach Irving from north Fort Worth; it is a Dallas County address well inside the 35-mile radius we cover, not an outer-edge call.
Booking is a call to (469) 333-1806 or a slot online, at any hour. Same-day service covers Irving most days; on an emergency call the typical response in the Fort Worth area is 1–2 hours.
The technician arrives in a marked polo with floor protection, runs the full diagnostic, and explains the fix and the price before touching a screw — then test-cycles the KitchenAid before leaving.
- Service area
- Irving, Dallas County · within 35 miles of Fort Worth
- Hours
- Open 24/7 · Monday – Sunday
- Response
- Same-day service · 1–2 hour response on emergency calls
- Phone
- (469) 333-1806
Google reviews
Rated 4.9 by 225 DFW homeowners
“Came out same day and outside of normal working hours at my request. We needed the washer to spin and balance properly and he knew exactly what was wrong. He has the parts on hand and got in and out within 45minutes. He was super respectful and took his shoes off when he entered without being asked. Vlad is truly a…”
Kelsee Garcia · Google · 2 months ago “They were on-time, professional, very affordable! They showed me how to operate the new installed valve for my dishwasher to work better. They also came to replace my garbage disposal after it stopped working. I will be calling them for all of our future plumbing needs. Thank you COWBOYS 🤠 💙 🙏🏽 ❤️”
Kimberly Warner · Google · 6 months ago
FAQ
KitchenAid repair in Irving — common questions
Do you come to Irving for KitchenAid repairs?
Yes. Irving is inside our core service area (Dallas County, within the 35-mile radius we serve from Fort Worth). Same-day slots are available most days — call (469) 333-1806 or book online and give the dispatcher your Irving address and the KitchenAid model number.
Are KitchenAid repairs different from Whirlpool repairs?
The two share Whirlpool Corporation engineering, so certain pumps, valves and control components overlap. KitchenAid adds its own features and finishes — third-rack wash systems, commercial-style range burners, PrintShield stainless — and those need parts matched to the exact KitchenAid unit rather than a Whirlpool equivalent.
Why is the third rack in my KitchenAid dishwasher not cleaning properly?
The third rack is fed by its own spray supply, so a blocked spray arm, a rack that is not seated on its water inlet at the back, or a weak circulation pump shows up there first. Clearing and reseating often solves it; if the pump is failing, we test it and explain the repair.
Why does ice keep clumping in my KitchenAid French-door refrigerator?
The ice maker relies on a tight door seal, a working fan and a clear drain path. When warm air leaks in or a fan slows, ice clumps and the chute can freeze solid. We check the gasket, fan and heater circuits and the water valve feeding the maker before recommending a part.
Nearby
KitchenAid repair near Irving
Also in Irving
Other luxury brands we repair in Irving
Independent service company — not affiliated with KitchenAid or any manufacturer listed.
Ready when you are
Book KitchenAid dishwasher & range repair in Irving
Give the dispatcher the KitchenAid model and your Irving address — the line is open 24/7 and the technician arrives with the likely parts.
Open 24/7 · Monday – Sunday
10501 Winding Passage Way, Fort Worth, TX 76131
